GovCon 360Dec 11 · ArlingtonDetails
Back to Blog

SBIR & STTR· · 8 min read

SBIR and STTR Performance of Work: How Much of the Research You Must Do Yourself

SBIR and STTR awards require your company to perform a minimum share of the research: two-thirds in an SBIR Phase I, half in a Phase II, and 40% (plus 30% by the research institution) in STTR. How the share is measured, when you certify it, and how to track it in your books.

SBIR and STTR Performance of Work: How Much of the Research You Must Do Yourself

Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) awards fund small businesses to do research, so the rules require the awardee to do a minimum share of that research itself. The share is set when you write the proposal, and you certify it again while the award is running. A company that leans heavily on a university, a subcontractor or consultants can find itself below the line without noticing.

This guide is for founders, principal investigators and the people who keep the books at SBIR and STTR companies.

The short answer

Under the Small Business Administration's (SBA) SBIR/STTR Policy Directive, section 6(a)(2):

  • SBIR Phase I: your company performs at least two-thirds of the research or analytical effort.
  • SBIR Phase II: your company performs at least half.
  • STTR, Phase I and Phase II: your company performs at least 40% of the research and development work, and the partnering research institution (a university, federal lab or nonprofit research institution) performs at least 30%.

Each agency measures the share in either total award dollars or labor hours, and must explain in its solicitation how it will be measured. In SBIR, the funding agreement officer (the agency official who signs the award) can approve a different percentage in writing. In STTR, the percentages are set by statute (15 U.S.C. 638(e)) and cannot be waived.

Performance of work is a calculation on your award's costs or hours. If your books do not track who did the work on each award, you cannot show the share when you certify it.

The requirements side by side

AwardYour company must perform at leastResearch institution must perform at leastCan it be changed?
SBIR Phase ITwo-thirds (66.7%) of the researchNo requirementYes, with written approval from the funding agreement officer, after consultation with the agency's SBIR program manager
SBIR Phase IIHalf (50%) of the researchNo requirementYes, with the same written approval
STTR Phase I and Phase II40% of the R&D30% of the R&DNo, the percentages are set by statute

The rest of the work, up to a third in SBIR Phase I, half in Phase II and 30% in STTR, can go to subcontractors and consultants.

Not the same as the limitations on subcontracting

Small business set-aside contracts have their own rule, the limitations on subcontracting in 13 CFR 125.6, which caps what a prime pays to subcontractors that are not similarly situated (for services, 50% of what the government pays the prime). SBIR and STTR awards follow the Policy Directive's percentages instead. The two are easy to mix up because Phase II's half looks like the 50% rule, but they are measured differently. The set-aside rule is covered in Limitations on Subcontracting: How to Track the 50% Rule by Contract.

How the share is measured

The Policy Directive lets each agency choose between two methods, and the solicitation tells you which one applies:

  • Total award dollars. The share of the award's costs attributable to work your company performs, compared with work performed by others. Read the solicitation for how it treats indirect costs, materials and the fee.
  • Labor hours. The share of the research hours worked by your employees, compared with the hours of the research institution, subcontractors and consultants.

Either way, the starting point is the same: who did the work. The Policy Directive's certifications say the research will be performed at the awardee's facilities by the awardee's employees, except as described in the application and approved in the award. Work by subcontractors and consultants counts toward the others' share, not yours.

An example

A company plans a $1,200,000 SBIR Phase II at an agency that measures in award dollars. Its own team accounts for $700,000 of the research. A university lab subcontract and two consultants account for $500,000.

Who performs the researchAmountShare
Your company$700,00058.3%
University subcontract and consultants$500,00041.7%
Total$1,200,000100%

The company is above the 50% minimum, with room for up to $200,000 more of outside work before it falls below. The same plan would not work in Phase I, where two-thirds is required. If the lab's scope grows during the award while the company's own hours fall behind plan, the share can drop under 50% before anyone checks.

When you certify it

The percentage is not checked only in the proposal. The Policy Directive's certifications ask you to confirm it at several points:

WhenPhase IPhase II
At awardYou certify the share you will performYou certify the share you will perform
Before you receive more than 50% of the total awardNot required by the Policy DirectiveYou certify again that you comply with program requirements
At or before final paymentYou certify that the work is complete and you performed the required shareYou certify that the work is complete and you performed the required share

Agencies can require certifications at other points too, such as with each payment. That is why the share is worth tracking during a Phase II, not only at the end: by the time you have been paid half the award, you are certifying against what you have actually performed.

  • The principal investigator's employment. In both phases, the principal investigator (the person leading the research) must be primarily employed by your company at the time of award and during the project, meaning more than half of their employment time. That rules out full-time employment elsewhere. In STTR, the principal investigator can instead be primarily employed by the research institution. Deviations need written approval.
  • Work in the United States. The research must be performed in the United States. An agency can approve a specific portion abroad in writing, for rare cases such as a material that is not available in the United States.

How to track it in your books

Performance of work is easy to show if your books already separate each award and each performer:

  1. Set up each award as its own Project or Class in QuickBooks Online, with its budget and period of performance.
  2. Record your employees' time daily against the award, including the principal investigator and any founders who work on it. This is the number most companies are missing, and it is the core of both methods.
  3. Charge each award its labor cost through labor distribution each pay period, so the dollar method has your side of the calculation.
  4. Code every subcontract and consultant bill to the award, separated by research institution, subcontractor and consultant.
  5. If your agency measures in hours, ask your research institution, subcontractors and consultants to report hours with their invoices.
  6. Recalculate the share monthly, and before each certification point, and compare it with the split in your proposal.

Timesheets matter here for the same reason they matter in any audit. Timesheets for SBIR Companies: Why Everyone, Including the CEO, Tracks Time covers how to roll them out. Planning the split starts in the budget, as we explain in How to Build Your SBIR Phase II Budget.

How WiseCost fits

If you need to show your performance of work share on an SBIR or STTR award, WiseCost is DCAA timekeeping and labor distribution software for small government contractors, including SBIR and STTR companies, that keep their books in QuickBooks Online. It keeps your company's side of the calculation:

  • Each award on its own. Each award is a Project or Class with its own budget and period of performance.
  • Your team's hours by award. Employees record time daily against each award and supervisors approve it.
  • Your team's dollars by award. Labor distribution posts each award's labor cost to QuickBooks Online as a journal entry, and the Labor Distribution report shows hours and labor cost by employee and by award.
  • Spending against the plan. Budget vs Actual by Contract compares spending on each award with its budget.

The subcontract and consultant side comes from the bills you already code to each award in QuickBooks Online.

FAQ

Up to one-third. The SBIR/STTR Policy Directive requires the awardee to perform at least two-thirds of the research or analytical effort in Phase I, unless the funding agreement officer approves a different share in writing after consulting the agency's SBIR program manager.

Up to half. In Phase II, the awardee must perform at least one-half of the research or analytical effort. As in Phase I, the funding agreement officer can approve a deviation in writing.

In both STTR phases, the small business must perform at least 40% of the research and development work and the partnering research institution at least 30%. These percentages are set by statute and cannot be waived.

Either, depending on the agency. The Policy Directive lets each agency measure the research effort using total award dollars or labor hours, and requires it to explain the method in the solicitation.

No. The limitations on subcontracting in 13 CFR 125.6 apply to small business set-aside contracts and cap payments to subcontractors that are not similarly situated. SBIR and STTR awards follow the percentages in SBA's SBIR/STTR Policy Directive instead.

The Bottom Line

Your company has to perform at least two-thirds of an SBIR Phase I, half of a Phase II, and 40% of an STTR award, with the research institution performing at least 30%. Agencies measure it in award dollars or labor hours, and you certify it at award and at final payment, plus, in Phase II, before you are paid more than half. Track each award's time and costs by performer from the first month, and the percentage is a report instead of a reconstruction.


Getting ready for a cost-type Phase II? Take the free DCAA Readiness Self-Assessment, or start a 14-day free trial of WiseCost on your own QuickBooks Online.

Official Sources